| 100% Cal | 100% Calibration | 100%标定 |
| 100% IVER | 100% Integration Vehicle Engineering Release | 100%集成车工程发布 |
| 100% PPAP | All parts at full PPAP for Vehicle program | 为了整车项目，所有零件须完全通过PPAP |
| 100% SVER | 100% Structure Vehicle Engineering Release | 100%结构车工程发布 |
| 65% Cal | 65% Calibration | 65%的动力总成标定 |
| 80% Cal | 80% Calibration | 80%的动力总成标定 |
| 8D | 8 Disciplines | 问题解决8步法 |
| A | Alpha | Alpha阶段（动力总成产品开发的一个阶段） |
| A MRD | Alpha Material Required Date | Alpha样件需求日期 |
| A/T | Automatic Transmission | 自动变速器 |
| A/T | Automatic Transmission | 自动变速器 |
| AA | Architecture Approval | 架构批准 |
| AAM | Alliance of Automobile Manufactures | 汽车制造商联盟 |
| ABS | Anti-lock Brake System or Anti-Block Steering | 防抱死制动系统 |
| AC | Architecture Confirmation | 架构确认 |
| ACE | Assistant Chief Engineer | 总工助理 |
| ACT | Activity | 工艺路线 |
| ACT BOM | Assembly Component Tree BOM | 总成件树形BOM |
| AD | Alternatives Development | 主题开发 |
| ADV | Analysis / Development / Validation | 分析/开发/验证 |
| ADV | Analysis, Development and Validation | 分析，开发和认证 |
| AE | Application Engineer | 应用工程师 |
| AE | Application Engineer | 应用工程师 |
| AEM | Assimilability evaluation method | 可装配性评估方法 |
| AFI | Architecture Framing Initiation | 架构框架启动 |
| AIAC | Automotive Industry Action Group | 美国汽车工业行动集团 |
| ALY | Alloy | 铝合金 |
| AMT | Automatic Machincal Transmission | 机械式自动变速器 |
| ANSI | American National Standards Institute | 美国国家标准协会 |
| AP | Advanced Purchasing | 提前采购 |
| AP | Assembly Plant | 总装厂 |
| APB | Automotive Product Board | 汽车产品委员会 |
| APD | Approved Product Description | 批准的产品描述 |
| APE | Annual Program Execution | 年度项目执行 |
| APEC | Asia Pacific Economic Cooperation | 亚太经济联盟 |
| APQP/CP | Advanced Product Quality Planning and Control Plan | 先期产品质量规划和控制计划 |
| APSB | Asia Pacific Strategy Board | 亚太战略委员会（通用汽车的高层管理组织） |
| AR | Appropriation Request | 项目预算 |
| ARC | Architecture Refinement Complete | 架构优化完成 |
| ASB | Automotive Strategy Board | 汽车战略委员会（通用汽车的高层管理组织） |
| ASC | | 经销商售后管理系统 |
| ASE | Automotive Safety Engineering | 汽车安全工程 |
| ASE | Aftersales Engineering | 售后工程 |
| ASN | Advanced shipping notice | 发货通知单 |
| ASSI | Architecture Statement of Strategic Intent | 战略意向的架构陈述 |
| Assy Check-in | Assembly Line Check-in | 装配线进场 |
| | 启动现场安调 |
| Assy PPAP | Assembly Line PPAP | 装配线 |
| | 通过PPAP |
| Assy PPAP | Assembly Line PPAP | 装配线通过PPAP |
| Assy PPV | Assembly Line Products and Process Validation | 装配线交付后的产品工艺验证 |
| Assy PPV | Assembly Line Production and Process Validation | 装配线交付后产品工艺验证 |
| Assy Run-Off | Assembly Line Run-Off | 装配线试装 |
| | 交样日期 |
| Assy Run-off | Assembly Line RUN-Off | 装配线整线打通，启动试装，允许手工装配 |
| Assy Run-off MRD | Assembly Line RUN-Off Material Requied Date | 装配线 |
| ATC | Auto Temperature Controller | 自动空调控制器 |
| ATF | Automatic Transmission Fluid | 自动变速箱油 |
| ATT | Attachment | 附件 |
| ATT | Actual takt time | 实际单件工时 |
| AVD | Advanced Vehicle Development | 先期车辆开发 |
| AVDC | Advance Vehicle Development Center | 先期车辆开发中心 |
| AVD-LT | Advanced Vehicle Development-Leadership Team | 前期整车开发-领导小组 |
| AVDP | Advanced Vehicle Development Process (Time between DSI and VPI) | 先期车辆开发流程（在DSI与VPI之间） |
| AVPM | Advanced Vehicle Planning Manager | 先期车辆计划经理 |
| B | Beta | Beta阶段（动力总成产品开发的一个阶段） |
| B | Build | 制造 |
| B MRD | Beta Material Required Date | Beta样件需求日期 |
| B+U | Building and Utility | 土建公用 |
| BAD | Build Authorization Document | 试制授权文档 |
| BC | Business Case | 业务计划 |
| BCM | Body Control Module | 车身控制器 |
| BDC | Body Distributon Central | 车辆调配中心 |
| BESC | Base Engine Steering Committee | 发动机总成战略转向委员会 |
| BIQ | Building in Quality | 制造质量 |
| BIR | Prototype Build Issue Report | 试制问题报告 |
| BIR | Build Issues Resolution | 试制问题 |
| BIR | Build Incident Report | 装车问题报告 |
| BIR | Bulding issue report | 造车问题报告 |
| BIW | Body-In-White | 白车身 |
| BIW | Body in White | 白车身 |
| BOD | Bill of Design | 设计清单 |
| BOE | Bill of Equipment | 设备清单 |
| BOM | Bill of Material | 物料清单 |
| BOM | Bill of Material | 物料清单 |
| BOM | Bill of Material | 物料清单 |
| BOM | Bill Of Material | 物料清单 |
| BOM | Bill Of Material | 物料清单 |
| BOM | Bill of Material | 物料清单 |
| BOP | Bill of Process | 工艺清单 |
| BOP | Bill Of Process | 工艺清单 |
| BP | Break Point | 断点 |
| BPD | Business Plant Deployment | 业务计划实施 |
| BPP | Best people practices | 最佳人员准则 |
| BPR | Business plan recompose | 业务流程重组 |
| BS | Body Shop | 车身车间 |
| BSD | Build Site Direction | 试制现场指导书 |
| BUFFER | Buffer | 线边缓存区 |
| C/CAP | Construction/Conversion and Acceleration Plan | 土建/改造和生产提速计划 |
| CAB | Change Approval Board | 更改审批会 |
| CAC | | 服务热线专员 |
| CAFE | Corporate Average Fuel Economy | 公司平均油耗 |
| Cal | Calibration | 动力总成标定 |
| CARE | Customer acceptance review evaluation | 整车报交检查 |
| CARE | Customer Acceptance & Review Evaluation | 用户接受度和审查评估 |
| CC | Concept Confirmation | 验证概念 |
| CC | Consolidation Center | 集散中心 |
| CC | Confirmation Clinic | 确认临床 |
| Cert LSO | Certification Lift Stop Order | 通过排放认证通知 |
| CET | Cold Environment Test | 寒区试验 |
| CH | Chassis Department | 底盘部 |
| CI | Concept Initiation | 提出项目概念 |
| CIM | Customer Interface Manager | 客户服务经理 |
| CIP | Continue Improve Process | 持续改进 |
| CIP | Continue Improve Process | 持续改进 |
| CIT | Continuous Improvement Team | 不断改进小组 |
| CIT | Compartment Integration Team | 车厢集成小组 |
| CMC | Container Management Center | 空箱管理中心 |
| CME | Change Management Engineer | 更改管理工程师 |
| Cmk | N/A | 临界机器能力指数 |
| Cmk | Capability Machine Index | 机器设备能力 |
| CMM | | 三坐标测量 |
| C-NCAP | China New CAR Assessment Process | 中国标准新车评估体系 |
| COC | Centre of Competence | 能力中心 |
| COE | Center of Expertise | 经验总结中心 |
| CP | Control Plan | 控制计划 |
| CPIT | Current Product Improvement Team | 现有产品改进小组 |
| Cpk | Complex Process Capability | 过程能力指数 |
| Cpk | Process Capability Index | 稳定过程的能力指数 |
| CPQE | Current Product Quality Engineer | 现有产品质量工程师 |
| CPV | Cost per Vehicle | 单车成本 |
| CR/DN | Change Request / Decision Notice | 更改决议 |
| CR/DN | Change Request/Decision Notice | 变更申请/决议通知 |
| CRB | Change Review Board | 更改评审小组 |
| CS | Contract Signing | 动力总成签署项目合同 |
| CS | Contract Signing | 合同签订 |
| CS1 | Controled Shipping 1 | 一级受控发运 |
| CS2 | Controled Shipping 2 | 二级受控发运 |
| CSC | Controls Steering Committee | 控制模块战略转向委员会 |
| CSI | Customer Satisfaction Index | 用户满意度指标 |
| CSI | Customer Satisfaction Index | 售后满意度 |
| CSN | Current Sequence Number | 流水号 |
| CSO | Contract Sign-Off | 合同签署 |
| CSO | Contract Sign-Off (VDP) | 整车签署项目合同（VDP术语） |
| CSO HC | Contract Sign-Off Health Check | 合同签署健康检查 |
| CSO HC | Contract Sign-Off Health Check | 合同签署健康检查 |
| CT | Cycle Time | 制程周期 |
| CT | Cycle time | 周期时间 |
| CT | Creativity Teams | 创造性工作小组 |
| CT | Critical Test | 关键试验 |
| CTS | Component Technical Specification | 零部件技术标准 |
| CTT | Common Timing Template | 标准2级进度模板 |
| CVER | Concept Vehicle Engineering Release | 概念车工程发布 |
| CVER LL | Concept Vehicle Engineering Release Long Lead | 概念车工程发布－－长周期 |
| CVIS | Completed Vehicle Inspection Standards | 整车检验标准 |
| CVQC | Completed vehicle quality ceter | 整车质量中心 |
| CVQCB | Completed vehicle quality ceter board | 整车质量目视板 |
| CVT | Continuously Variable Transmission | 无级变速器 |
| D.Q.R | | 合格率概况 |
| DAS | Design & Analysis Section | 设计分析科 |
| DC | Deliver Charter | 递交项目章程 |
| DCN | Design Change Notice | 设计更改通知 |
| DCN | Design Change Notice | 设计更改通知 |
| DCP | Dimension Control Plan | 尺寸控制计划 |
| DCS | Design Concept Sheet | 概念设计表 |
| DCT | Double Clutch Transmission | 双离合器变速箱 |
| DD | Direct Delivery | 直接投线 |
| DDSP | Driver Door Switch Pack | 驾驶席门控开关 |
| DEI | Die Engineering Integration | 模具工程集成 |
| DFA | Design for Assembly | 装配工艺性设计 |
| DFM | Design for Manufacturability | 制造工艺性设计 |
| DFMEA | Design failure mode and effects analysis | 设计失效模式和效果分析 |
| DFMEA | Design FMEA | 设计失效模式分析 |
| DIFF | Differential | 差速器 |
| DL 3b | Design Level 3b | 设计阶段3b |
| DMS | Dealer Manage System | 经销商管理系统 |
| DOL | Dealer On Line | 经销商在线系统 |
| DP | Demand Plan | 需求计划 |
| DPV | Defects per vehicle | 单车缺陷数 |
| DPV | Defect per Vehicle | 单车缺陷数 |
| DQ&V | Design Quality & Validation | 设计质量和验证 |
| DR | Direct run | 直接通过率 |
| DRC | Design Review Committee | 设计评审委员会 |
| DRE | Design Responsible Engineer | 设计和发布工程师 |
| DRE | Design Release Engineer | 设计发布工程师 |
| DRE | Design release engineer | 设计发布工程师 |
| DRL | Direct run loss | 直接通过损失率 |
| Drop Off | Drop Off | 停产 |
| DS44 | HIGH SPEED DURABILITY TEST | 高速耐久试验（MGRES 标准） |
| DSG | Direct shift gearbox | 双离合器变速箱 |
| DSI | Document of Strategic Intent | 战略意向书 |
| DSM | Driver Seat Module | 驾驶席座椅控制模块 |
| DSO | Design Sign Off | 设计签署 |
| DTA | Design Theme Alternatives | 设计主题选项 |
| DTC | Diagnostic Trouble Code | 诊断故障码 |
| DV | Design Validation | 设计验证 |
| DV | Design Validation | 产品设计验证 |
| DVP | Design Validation Plan | 设计验证计划 |
| DVT | Dynamic vehicle test | 整车综合动态测试 |
| E/T/C | Engine/Transmission/Controller | 发动机/变速器/控制模块 |
| EBA | Emergency Brake Assistant | 紧急制动辅助系统 |
| EBD | Electronical Brake Distribute | 电子制动力分配系统 |
| EBOM | Engineering BOM | 工程BOM |
| EC | Embedded Controller | 控制模块 |
| ECC | ERP Central Component | ERP核心组建 |
| ECR | Engineering Change Request | 工程更改请求 |
| ECR | Engineering Change Request | 工程更改请求 |
| ECR | Engineering Change Request | 工程更改申请 |
| ECR | Engineering Change Request | 工程项目变更申请 |
| ECS | Engineering Change Summary | 工程变更摘要 |
| ECT | Emission Control System | 电子控制自动变速器 |
| EDS | Electronic Data Systems | 电子数据系统 |
| EEVC | European Enhanced Vehicle-Safety Committee | 欧洲提高车辆安全性委员会 |
| EFEO | Emissions & Fuel Economy | 排放和燃料经济 |
| EGM | Engineering Group Manager | 产品工程小组经理 |
| EI&S | Electronics Integration & Software | 电器零件集成和软件 |
| ELV | End of life vehicle | 整车寿命结束 |
| EMlS | Emission | 排放 |
| EMS | Engine Management System | 发动机管理系统 |
| ENB | Build-Test Section | 试制试验科 |
| E-NCAP | Euro New Car Assessment Process | 欧洲标准新车评估体系 |
| ENG | Engineer | 工程师 |
| EOA | End of Acceleration | 生产提速的完成 |
| EOLT | End of Line Test | 生产线试验结束 |
| EP | Engineering Prototype | 工程样车（件） |
| EPA | Environmental Protection Agency | 环境保护厅 |
| EPC | Engineering Program Committee | 工程项目委员会 |
| EPN | Engineering Project Number | 工程项目数目 |
| ERD | Early Requirement Document | 早期的要求文件 |
| ESB | European Strategy Board | 欧洲战略委员会（通用汽车的高层管理组织） |
| ESO | Engineering Sign Off | 发动机整机 |
| 工程签署 | | |
| ESO | Engineering Sign Off | 工程签署 |
| ESO | Engineering Sign-off | 工程签署 |
| ET | Engineering Technology | 工程技术 |
| EV | Engineering Vehicle | 工程样车 |
| EWO | Engineering Work Order | 工程工作指令 |
| EWO | Engineering Work Order | 工程更改号 |
| EWO | Engineering workorder | 工程更改流程 |
| Exp Cal | Experimental Calibration | 尝试性标定 |
| FA | Final Approval | 批准正式生产 |
| FAC | | 集团销售经理 |
| FATG | Final Approval to Grain | 生产最终批准 |
| FBIW | First Body in White Complete | 第一轮白车身完成 |
| FE | Functional Evaluation | 功能评估 |
| FE LSO | Fuel Economy Label Lift Stop Order | 通过油耗认证的通知 |
| FIVC | First Integration Vehicle Complete | 第1辆集成车制造完毕 |
| FIVC | First Integration Vehicle Complete | 第一轮集成车完成 |
| FLO | Factory Layout | 工厂布局 |
| FM | | 功能尺寸 |
| FM | Finance Manager | 财务经理 |
| FMC | First Mule Complete | 第一轮骡子车完成 |
| FMC | | 区域售后支持 |
| FMEA | Failure model effectiveness analysis | 失效模式分析 |
| FMEA | Failure model effectiveness analysis | 失效模式分析 |
| FMEA | Failure Mode and Effects Analysis | 潜在失效模式及后果分析 |
| FMEA | Failure mode and effects analysis | 失效模式和后果分析 |
| FMEA | Failure Mode and Effect Analysis | 失效模式和影响分析 |
| FMS | Flexible manufacturing systems | 柔性制造系统 |
| FMVSS | Federal Motor Vehicle Safety Standards | 联邦汽车安全标准 |
| FPPV BIW | First Product/Process Body in White Complete | 第一轮产品/工艺白车身完成 |
| FPPVC | First Product/Process Validation Vehicle Complete | 第一轮产品/工艺验证车辆完成 |
| FPS | Fixed Point Stop | 固定停止位置 |
| FTC | First Time Capability | 首次能力 |
| FTP/FTQ | First time pass/quality | 一次通过合格率 |
| FTQ | First time quality | 下线合格率 |
| FWD | Four Wheel Drive | 四轮驱动 |
| G | Gamma | Gamma阶段（动力总成产品开发的一个阶段） |
| G MRD | Gamma Material Required Date | Gamma样件需求日期 |
| G/L | Group leader | 工段长 |
| GA | General Assembly | 总装 |
| GA | General Assembly | 总装 |
| GADT | Global Architecture Development Team | 全球架构开发小组 |
| GBOM | Global Bill of Material | 全球物料清单 |
| GMNA | General Motors North America | 通用汽车北美分部 |
| GMPT | General Motors Powertrain | 通用汽车动力总成分部 |
| GPDC | Global Product Development Council | 全球产品开发理事会 |
| GPDP | Global Powertrain Development Process | 全球动力总成开发流程 |
| GPDS | Global Product Description System | 全球产品管理系统 |
| GSD | Global Segment Director | 全球细分主管 |
| GSS | Global Sales and Service | 全球销售和服务 |
| GVDP | Global Vehicle Development Process | 全球整车开发流程 |
| GVDP | Global Vehicle Development Process | 整车开发流程 |
| GVDP | Global Vehicle Development Process | 整车开发流程 |
| GVDP | Global Vehicle Development Process | 全球汽车开发流程 |
| GVDP | Global Vehicle Development Process | 全球整车开发流程 |
| GVDP | Global Vehicle Development Process | 整车开发流程 |
| GVLE | Global Vehicle Line Executive | 整车平台执行 |
| GVW | Gross Vehicle Weight | 车辆总重 |
| GW | Gateway | 网关 |
| HET | Hot Environment Test | 热带试验 |
| HRC | Hardware Release Center | 硬件发布中心 |
| ICD | Interface Control Document | 接口控制文件 |
| IDR | Initial Data Release | 初始数据发布 |
| IDSR | Integration Driven Subsystem Requirement | 集成驱动子系统要求 |
| ILP | Inbound Logistic Planning | 入厂物流规划 |
| IMES | Integration Manufacturing Executive System | 生产执行系统 |
| Initial Cal | Initial Calibration | 初始标定 |
| IOM | Inspection operator method | 检验操作方法 |
| IOS | Inspection operator summary | 检验操作概要 |
| IPPE | integrated Product and Process Engineering | 集成产品与工艺工程 |
| IPTV | Incident per Thousand Vehicles | 每千辆车的故障率 |
| IPTV | Incidents Per Thousand Vehicles | 每一千台车事故率 |
| IPTV | Incidents Per Thousand Vehicles | 每千辆车的故障率 |
| IPTV | Incidents Per Thousand Vehicles | 千辆车故障率 |
| IR | Incident Report | 事故报告 |
| IRP | Issue Resolution Process | 问题解决流程 |
| IRR | Internal Rate of Return | 内含报酬率 |
| ISO | International Standard Organization | 国际标准化组织 |
| IV | Integration Vehicle | 集成车 |
| IV MRD | Integration Vehicle Material Required Date | 集成车的物料需求日期 |
| IVBR | Integration Vehicle Build Readiness Review | 集成车制造准备评审 |
| IVER | Integration Vehicle Engineering Release | 集成车工程发布 |
| JIS | Just In Sequence | 排序供货 |
| JIS | Just In Sort | 供应商排序供货方式 |
| JIS | Job Instruction Sheet | 岗位指导书 |
| JIT | Just In Time | 及时供货 |
| JIT | Just In Time | 供应商及时供货方式 |
| JPH | Job per Hour | 生产节拍 |
| JRS | Joint Ride Session | 联合评审 |
| JSC | | 生产采购委员会 |
| JSC-GP | Joint Sourcing Committee - General purchase | 联合采购委员会-一般采购 |
| Kcc | Key Control Characteristic | 关键过程控制特性 |
| KCC | Key Control Character | 关键控制特性 |
| KCDS | Key Characteristic Designation System | 产品关键特性定义系统 |
| KO | Kick-Off | 启动 |
| Kpc | Key Product Characteristic | 关键产品特性 |
| KPC | Key Product Characteristic | 关键产品特性 |
| KPC | Key product characteristic | 主要产品特性 |
| KPC | Key product characteristic | 主要产品特性 |
| KPC | Key process control | 关键过程控制 |
| KPC | Key process control | 关键过程控制 |
| LAAMSB | Latin America, Africa, Middle East Strategy Board | 通用的拉美，非洲，中东战略委员会 |
| LCL | Lower Control Limit | 管制下限 |
| LCS | Logistic Confirmation Sheet | 物流确认单 |
| LL | Learning Loop | 学习周期 |
| LL | Long Lead | 长周期 |
| LLPR | Long Lead Production Release | 长周期的产品发布 |
| LM | Launch Manager | 启动经理 |
| LOU | Line of Usage BOM | 整车BOM行 |
| LSL | Lower Specification Limit | 规格下限 |
| LSP | Lean sales and marketing prograne | 精宜营销 |
| LTR | Launch Team Release | 启动小组释放 |
| LWO | Logistic Work Order | 物流属性更改号 |
| M+E | Machine & Equipment | 机器设备 |
| MAC | | 区域经理 |
| MBOM | Manufacturing BOM | 制造BOM |
| MDS | Materiel Data Sheet | 物料数据单 |
| ME | Manufacture Engineer | 样车试制工程师或生产线制造工程师 |
| ME | Machine and Electronic | 电器设备 |
| ME | Manufacturing Engineering | 制造工程 |
| ME | Manufacturing Engineering | 制造工程 |
| MEC | | 区域市场支持 |
| MEIS | Manufacturing Engineering Info System | 制造工程信息系统 |
| MES | Manufacturing Execution System | 制造执行系统 |
| MES | Manufacturing Execution System | 制造执行系统 |
| MFG Site Dec | Manufacturing Site Decision | 确定生产厂址 |
| MIC | Marketing Information Center | 市场信息中心 |
| MILKRUN | Milkrun | 循环取货 |
| MKT | Marketing | 营销 |
| MMR | Manufacturable Math Release | 制造数模发布 |
| MO | Manufacturing Operations | 生产管理部门 |
| MP OTS 100% | 100% Made Parts in OTS | 100%自制件达到OTS状态 |
| MP OTS 100％ | 100％ Made Parts in OTS | 100%自制件达到OTS状态 |
| MP PPAP | Made Parts PPAP | 自制件 |
| 通过PPAP | | |
| MP PPAP | Made Parts PPAP | 自制件通过PPAP |
| MP PPV | Made Parts Production and Process Validation | 自制件生产线交付后的产品工艺验证 |
| MP PPV | Made Parts Production and Process Validation | 自制件生产线交付后的产品工艺验证 |
| MPS | Master Planning System | 主计划系统 |
| MPV | Multi-Purpose Vehicle | 多用途轿车 |
| MR | Manufacturing Requirements | 制造要求 |
| MRD | Material Required Date | 交样日期 |
| MRD | Material Requirement Date | 物料需求日期 |
| MRD | Material Required Date (for physical builds) | 物料需求日期（用于制造样机） |
| MRD | Math Required Date (for virtual builds) | 数模需求日期（用于虚拟制造） |
| MRE | Manufacturing Responsible Engineer | 制造工程师 |
| MS | Manufacturing Studies | 制造车间 |
| MSA | Measurement System Analysis | 测量系统分析手册 |
| MSA | Measurement System Analysis | 测量系统分析 |
| MSA | Measure System Analyse | 测量系统分析 |
| MSA | Measurement system analysis | 测量系统分析 |
| MSS | Market Segment Specification | 市场细分规范 |
| MSS | | 区域销售支持 |
| MSS | Market Segment Specification | 市场分割规范 |
| MT | Manual Transmission | 手动变速箱 |
| MT&E | Machines, Tools and Equipment | 机床，工装和设备 |
| MTS | Manufacturing Technical Specification | 制造技术标准 |
| MVB | Manufacturing Validation Build | 用于认证制造工艺的整车制造 |
| MVB | Manufacturing Validation Build | 制造验证造车 |
| MVB (ns) | Manufacturing Validation Build (non saleable) | 用于认证制造工艺的整车制造（不可销售的） |
| MVB (s) | Manufacturing Validation Build (saleable) | 用于认证制造工艺的整车制造（可销售的） |
| MVBns | Manufacturing Validation Build Non-Salable | 非销售制造验证造车 |
| MVBs | Manufacturing Validation Build Salable | 销售制造验证造车 |
| MVSS | Motor Vehicle Safety Standards | 汽车安全标准 |
| MWO | Manufacture Work Order | 制造属性更改号 |
| MY | Model Year | 年度款 |
| MYM | Model Year Manager | 车型年经理 |
| NAO | North American Operations | 通用的北美分部 |
| NEO | New Employee Orientation | 新员工培训 |
| NOA | Notice of Authorization | 授权书 |
| NOD | Notice of Decision | 决议 |
| NOD | Notice of Decision | 决议通知 |
| NPV | Net Present Value | 净现值 |
| NRD | Normal Road | 一般公路 |
| NSB | North American Strategy Board | 通用的北美传略委员会（通用的高层管理组织） |
| OBD | On Board Diagnostics | 车载诊断系统 |
| OEM | Original Equipment manufacturers | 原始设备制造商（主机厂） |
| OEM Run-Off | Original Equipment Manufacturer Run-Off | 零件供应商 |
| 工装设备具备试生产条件 | | |
| OEM Run-off | Original Equipment Manufacturer Run-off | 零件供应商工装设备具备试生产条件 |
| OJT | On Job Training | 在岗培训 |
| OPO | Office of Product Operations | 产品高层管理组织 |
| ORS | Occupant Restraint System | 乘员约束系统 |
| OT | Overtime | 加班 |
| OTD | Order to Delivery | 订单到货时间 |
| OTP | On Time Performance | 及时性能 |
| OTS | | 装车评审 |
| OTS | Off-tool Sample | 工装样件 |
| OTS | Off-tool Sample | 工装样件 |
| OTS | Off-tool Sample | 工装样件 |
| OTS | OFF-TOOL-SAMPLE | 工装样件 |
| OTS QV | OTS Quality Valve | OTS质量阀 |
| OTS交付状态满足质保的开阀要求 | | |
| OTS QV | OTS Quality Valve | OTS质量阀，OTS交付状态满足质保的开阀要求 |
| OTS TG2 | Off Tooling Samples Tooling Go Level 2 | OTS设计达到TG2阶段，发布图纸用于供应商启动工装和设备投入 |
| OTS TGL2 | Off Tooling Samples Tooling Go Level 2 | OTS设计达到TG2阶段 |
| P | Pilot | 批量试生产 |
| P | Pilot | 小批量生产 |
| PA | Production Approval | 批准正式生产 |
| PA | Program Administrator | 项目管理专员 |
| PaC | Physical Alpha for Customer | 提交客户的Alpha样机 |
| PACK | Packaging | 包装规划 |
| PAD | Product Assembly Documentation | 产品装配文件 |
| PAM | Product Assemble Manual | 样车装配指南 |
| PAM | Product Assemble Manual | 产品装配手册 |
| PAPIR | Product and Process Integration Review | 产品和工艺集成会议 |
| PAS | Packaging Approval Sheet | 包装确认单 |
| PAS | Parking Aid System | 泊车辅助系统 |
| PAS | Parking Aid System | 泊车辅助系统 |
| PbC | Physical Beta for Customer | 提交客户的Beta样机 |
| PBS | Painted Body Store | 油漆车身存储区 |
| PC | Deliver Pilot to Customer | 向客户提交Pilot产品 |
| PC | Pullcord | 拉环 |
| PC | Problem Communication | 问题信息 |
| PC&L | Production Control and Logistics | PC&L部门（GM的一个部门） |
| PCL | Production Control Manager | 生产控制与支持 |
| PCM | Powertrain Control Module | 动力总成控制模块 |
| PCM | Process Control Manager | 工艺控制负责人 |
| PCN | Project Cost Change Notice | 项目更改通知单 |
| PCN | Project Costbook Change Notice | 项目Costbook更改通知单 |
| PCR | Problem communication report | 问题交流报告 |
| PCR | Problem communication report | 问题交流报告 |
| PCR | Problem Communication Report | 问题交流报告 |
| PCR | Problem Communication Report | 问题交流报告 |
| PDC | Parking Distance Control | 泊车距离控制 |
| PDC | Parking Distance Control | 泊车距离控制 |
| PDCA | Plan、Do、Check、Action | 计划、实施、检查、行动 |
| PDCA | Plan-Do-Check-Action | 计划,实施,检查,行动 |
| PDI | Product delivery inspection | 产品交付检查 |
| PDI | Preliminary Data Indicator | 初步数据指示器 |
| PDI | Pre-delivery Inspection | 车辆行运“零公里”检查报告 |
| PDS | Product Data Structure | 产品数据结构，在SCM中用到的数据对象，集成了BOM、工艺和工厂布局信息 |
| PDT | Product Development Team | 产品开发组 |
| PDT | Product Development Team | 产品开发小组 |
| PDT | Product Development Team | 产品开发小组 |
| PDT | Product Development Team | 产品开发小组 |
| PDT | Product Development Team | 产品开发小组 |
| PE | Product Engineering | 产品工程 |
| PET | Program Executive Team | 项目执行小组 |
| PET | Program Execution Team | 项目组 |
| PET | Program Execution Team | 项目执行小组 |
| PFI | Program Framing Initiated | 项目框架启动 |
| PFMEA | Process failure mode and effectsanalysis | 过程失效模式和后果分析 |
| PFMEA | Process FMEA | 工艺失效模式分析 |
| PFMEA | Process failure mode & effects analysis | 过程失效模式分析 |
| PFSE | Product Focus Systems Engineer | 产品系统工程师 |
| PG3 | Powertrain Gateway | 关键里程碑节点 |
| PgC | Physical Gamma for Customer | 向客户发运Gamma样机 |
| PGM | Program Management / Project Management | 项目管理 |
| PGM | Program Management | 项目管理 |
| PGM | Program Management | 项目管理 |
| Pilot | Pilot | 试生产 |
| Pilot | Pilot | 试生产 |
| Pilot QV | Pilot Quality Valve | 试生产质量阀满足启动试生产的开阀要球 |
| Pilot MRD | Pilot Material Requied Date | Pilot交样日期 |
| Pilot MRD | Pilot Material Required Date | Pilot的物料需求日期 |
| Pilot QV | Pilot Quality Valve | 试生产质量阀 |
| 满足启动试生产的开阀要求 | | |
| PIM | Powertrain Interface Manager | 动力总成接口经理 |
| PLM | Production Launch Manager | 生产启动经理 |
| PLP | | 单车利润表 |
| PM | Programme Manager | 项目工程经理 |
| PM | Program Manager | 项目经理 |
| PM | Program Manager | 项目经理 |
| PM | Plan maintain | 计划维护 |
| PM | Prevention Maintenance | 预防性维护 |
| PM | Program Manager | 项目经理 |
| PMO | Program Management Office | 项目管理办公室（通用的一个部门） |
| PMP | | 常规尺寸 |
| PMT | Product Management Team | 产品管理小组 |
| PN | Part NO. | 零件号 |
| PP | Pre-pilot | 前期试生产 |
| PP | Pre-Pilot | 预试生产 |
| PP | Pre-pilot | 试生产 |
| P-P | Pre-Pilot | 试生产 |
| PP PPAP | Purchased Parts Production Parts Approval Process | 外购件完成生产件批准程序 |
| PP Appr. | Purchased Parts Approved | 外购件批准 |
| SQE开具入库许可单 | | |
| PP ESO | Purchased Parts Engineering Sign Off | 外购件工程签署，完成OTS认可/阶段认可 |
| PP OTS 100％ | 100％ Purchased Parts in OTS | 外购件的OTS交样率达到100％ |
| PP OTS 80% | 80% Purchased Parts in OTS | 外购件的OTS交样率达到80% |
| PP OTS 80％ | 80％ Purchased Parts in OTS | 外购件的OTS交样率达到80％ |
| PP PPAP | Purchased Parts PPAP | 外购件完成PPAP |
| PPA | Product Planning Approval | 产品规划批准 |
| PPAP | Production Parts Approval Process | 生产件批准程序 |
| PPAP | Production Part Approval Process | 生产零部件批准程序 |
| PPAP | Production Part Approval Process | 生产件批准程序 |
| PPAP | Production Part Approval Process | 生产件批准程序 |
| PPAP | Production Parts Approval Process | 生产件批准程序 |
| PPAP | Production Part Approval Process | 生产件批准流程PPAP |
| PPAP | Production Part Approval Process | 产品零部件批准流程 |
| PPAP | Production Part Approval Process | 生产零部件批准程序 |
| PPC | Deliver Pre-Pilot to Customer | 向客户发运Pre-pilot动力总成 |
| PPC | Product Program Content | 项目任务书 |